{"product_id":"aculon-nanoproof-3-02-40ml-acu302-40ml","title":"Aculon NanoProof 3-02 - 40ml","description":"Aculon® NanoProof® 3 series offers anti-wetting, anti-stiction, chemical protection, corrosion protection and moisture protection of printed circuit boards and electronic components. \r\nThe NanoProof® 3 has similar performance and chemical properties as 3MTM NovecTM products providing a readily available and accessible drop-in alternative to the 3MTM NovecTM product series. \r\n\r\nAculon® NanoProof® surface coating is capable of imparting hydrophobicity and oleophobicity to a wide variety of surfaces in a simple, one-step process. It is designed for multi-surface treatment on metals, \r\nsemiconductors, and polymers.\r\n   Solids Solvent Color NanoProof 3-002 (0.2%) Fluorosolvent Light green NanoProof 3-02 (2%) Fluorosolvent Light green NanoProof 3-04 (4%) Fluorosolvent Light green \r\nNanoProof 3-08 (8%) Fluorosolvent Light green NanoProof 3-10 (10%) Fluorosolvent Light green Physical Properties of Formulation                  (all values @ 25°C)  Viscosity* \u0026lt; 20 cP Boiling Point of Solvent\r\n 56.2°C (133°F) Flash Point Not applicable Non-flammability Meets UL 94 V-0 Environmental Low in toxicity, non-ozone depleting, low in GWP, RoHS compliant and VOC exempt (per U.S.-EPA), contains no \r\nchlorine or bromine Shelf Life 2 Years (Unopened container) Specific Gravity 1.49 g\/ml *Determined by Zahn Cup Number 1 testing Physical Properties of Post Treatment Coating   Tg (glass transition) -95°C from peak on DSC Thermal Stability of Dry Film Can withstand 175°C for 24hrs and maintain repellency Thermal Conductivity In Process Coefficient of Thermal Expansion In Process Water Contact Angle  120° Oil Contact Angle  80° Refractive Index 1.376 @632.8nm Solder Through Repairability Yes Electrical Properties   Dielectric Breakdown Strength (@35% RH) 3600 V\/mil Moisture and Insulation Resistance  2.54E+12 O Volume Resistivity 6.33E+13 O·cm (@30 VDC) Dielectric Constant In Process Dissipation Factor In Process    Aculon® NanoProof® 3 Series Electronic Coating            NanoProof® 3 Series Revised on 3\/30\/23   Features • Creates moisture barriers on coated parts  • Repels water, oil, and other liquid organic materials • Adheres to a variety of surfaces ensuring protection of PCBs. • Push-through conductivity within 2 hours  Easy to apply and dries quickly without the need for curing   Thermally and electrically stable  Moisture, chemical, corrosion protection for printed circuit boards and electrical components  \r\n\r\nAnti-wetting and anti-stiction in many diverse applications  Chemical Compatibility Recommendation for tubing and plastics via application equipment . Compatible with: PEEK, Polyethylene terephthalate\r\n (PET), Polyphenylene sulfide (PPS), Polystyrene, EPDM, ABS, Aluminum, Stainless Steel, Glass  Avoid: Viton, HDPE, LDPE, CPVC, PVC, PTFE, PVDF, silicone, neoprene, Polypropylene,\r\n PMMA  Application Techniques Surface Preparation\/ Cleaning: Ensure that the surface is free of any grease, fingerprints, adhesive residues or dirt. This can be accomplished by first degreasing the \r\nsurface with solvents or by rinsing with soap and water or by rinsing with IPA. Depending on the sensitivity of your part to liquids Kyzen cleaners like Ionox I3416 or Cybersolv 141-R may be most appropriate\r\n for removing surface contamination.     \r\nContact Aculon if you are unsure what cleaner to use and we will recommend one best suited for your application. Substrates should be coated after cleaning as\r\n soon as possible to minimize the potential for recontamination.   Testing For Hydrophobicity:   Allow droplets of water to fall onto the surface, they should bead up to a contact angle \u0026gt;90°. If the surface is not hydrophobic clean the surface again and reapply.  Safety, Handling, Storage, Shelf Life:                                                                                                             Store in a cool (~25°C) and dry area, and keep away from direct sun light. See this product’s SDS for proper handling. When stored properly, product has a 2 year shelf life.  For Additional Information: To request additional product information or sales assistance, contact Aculon’s Technical Team, at 858-350-9474. For information on other Aculon products, please visit our website at www.aculon.com.   Application Ideas Application Options   Flow coat, selective dispense, dip, spray or brush apply. If dipping, Aculon recommends an extraction rate of 100 mm\/min or less. Dilution  Can be diluted with FS-350 fluorosolvent Drying\/Curing Dries at room temperature in under 5 minutes. Removability FS-350 fluorosolvent NanoProof® 3 Series Revised on 3\/30\/23","brand":"Aculon","offers":[{"title":"Default Title","offer_id":47022757478638,"sku":"ACU302-40ml","price":0.0,"currency_code":"NZD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/3769\/1630\/files\/Novec_Replacement.jpg?v=1759113234","url":"https:\/\/www.baskiville.co.nz\/products\/aculon-nanoproof-3-02-40ml-acu302-40ml","provider":"Baskiville","version":"1.0","type":"link"}