Skip to content
📞 Free NZ: 0800 227 548 | 🌎 Int: +64 (0) 3 302 8703 | ✉️ Contact Us
📞 Free NZ: 0800 227 548 | 🌎 Int: +64 (0) 3 302 8703 | ✉️ Contact Us
Fraser 4510 Flat Ionised air nozzle
4510 flat ioniser.jpg
fra4510.jpg
4510 flat ioniser.jpg
fra4510.jpg

Fraser 4510 Flat Ionised air nozzle

SKU FRA4510
by Fraser
Sold out
$0.00 - $0.00
$0.00
$506.60
$506.60 - $506.60
$506.60
The 4510 is part of Fraser’s comprehensive range of cleaning products for removing dust and static electricity from mouldings, assemblies, PCBs, automobiles, graphics, optics and medical parts. The 4510 Ionised Air Nozzle produces a fast, quiet and flat jet of ionised air for efficient static neutralisation and cleaning. Up to 6 kV of ionising power provided by a Fraser HP Power Unit thoroughly neutralises the static charge, allowing dust removal without the risk of re-attraction Nozzles amplify compressed air by up to 20:1 for economical operation Simple design optimises ionisation and blow-off power from a concentrated air flow Low noise, versatile and easy to install The 4510 is widely used for static neutralisation and dust removal from small mouldings and similar parts. Also for product separation in automatic feeders. # Power supply This Flat Ioniser air nozzle needs a FRA4125PSU power supply or HP50 ion power supply or FRA1250PSU-1
Features & Benefits

Up to 6 kV of ionising power provided by a Fraser HP Power Unit thoroughly neutralises the static charge, allowing dust removal without the risk of re-attractionNozzles amplify compressed air by up to 20:1 for economical operationSimple design optimises ionisation and blow-off power from a concentrated air flowLow noise, versatile and easy to installThe 4510 is widely used for static neutralisation and dust removal from small mouldings and similar parts. Also for product separation in automatic feeders.

Specifications

Construction Stainless steel and PTFE.Cable Hi-Flex 30 kV screened cable with 70 mm bend diameter. Standard length is 2 m - longer lengths can be specified at time of order (subject to maximum load on power unit).Safety 100 Mohm resistance in series with HV for shockless operation. Air Supply Air Pressure: maximum 7 Bar. Air Consumption: 2 Bar: 180 l/min. 7 Bar: 520 l/min.Air Fitting: push-fit connector for 8mm OD TubingEnvironmental 60 °C maximum temperature. 70 % rH non-condensing max.Noise: 76 dBA @ 7 Bar.Certification CE.