Products

This element has two wires and suits the PACE SX20 and SX25 desolder handpieces

Suit very early IR30 PACE soldering handpiece. Plugs in with 2 round pins and earth strap on the side. 120 volt 30 watt Was used on PACE PRC150 ...

For PACE PS 80 Soldering Handpiece to hold element in. Approx. 22.5mm Long For PS 90/70 use part # 1410-0122-P1 approx. 18mm long

1410-0122-P1 Package of 1 For PACE PS 90/70 Soldering Handpiece to hold element in. Approx. 18mm long For PS80 use P/N 1410-0104-P1 approx. ...

6010-0107-P1 Package of 1 Suits PACE SX80 and early SX90 Desolder handpiece, latest types with cardboard Flux trap door Has black coloured...

6010-0095-P1 Package of 1 Suits PACE PS80 and PS90 soldering handpiece Has no wires but plugs in. 21 Volt 50 Watt

Replacement heater element for Pace ST300/325/350 and Later TF200 units. All ST300/325/350 Machines use this 6010-0122-P1 Heater Element If t...

6010-0163-P1 Package of 1 For SX90 and SX100 handpiece only with larger blue connector SX80 has a smaller black plug P/N 6010-0107-P1 21 V...

Suits most common PACE SX70 handpiece used on MBT 200 and 250 type systems 21 volt 48 watt 5 wires including earth

Pace TF 200 heater 230 volts. Used on earlier Models . Heater Body approx. 80mm long Machine Serial number 03-99-9999 and below. Later TF200 ...

A Pace replacement heater element for a PACE TJ-70 handpiece In New Zealand Baskiville are authorised agents for Pace Baskiville stock an...

6010-0081-P1 Package of 1 Replacement Heater Element Suits PACE TP65 ThermoPik handpiece. 21 Volt 43 Watt In New Zealand Baskiville are...

6010-0083-P1 Package of 1 Pace TT-65 element with out sensor For TT-65 element with sensor P/N 6010-0083-P1 In New Zealand Baskiville are ...

1321-0085-01-P6 Package of 6 For PACE SX 70 SX80 cord and pipe clip In New Zealand Baskiville are authorised agents for Pace Baskiville sto...

The hot grip removal pad is a high temperature rubber pad used to remove hot quick change Pace cartridge soldering tips i.e. like the 1124, 1128, 1...

For MBT100

IR3100 Infrared BGA Rework Station The IR 3100 can easily install and remove BGA, QFN, µBGA/CSP, Flip Chip and other SMD's. Featuring a 500W inf...

The Pace Kit Overhaul Ped-A-Vac (6993-0043-P1) is a genuine Pace maintenance kit designed to restore full performance and reliability to Ped-A-Vac ...

Pace kit -1338-0002 -1338-0001 4 vane Pump repair kit

The Pace Kit Vent Dual Path (6993-0065-P1) is a genuine Pace service kit engineered to maintain and restore the efficiency of dual-path ventilation...

The Pace Kit, Angle Bracket MBT (6018-0097-P1) is a genuine mounting accessory designed for securing and supporting Pace MBT (Modular Bench Top) sy...

Calibration Kit Pace 220-250 MBT

6993-0153-P1 Package of 1 Selection of three different size vacuum cup tips. Approx. size 13.5mm, 8.5mm and 5.75mm. As used on some IR3000 pi...