Skip to content
📞 Free NZ: 0800 227 548 | 🌎 Int: +64 (0) 3 302 8703 | ✉️ Contact Us
📞 Free NZ: 0800 227 548 | 🌎 Int: +64 (0) 3 302 8703 | ✉️ Contact Us
Desco Statguard Low-Voc Floor Finish, 10L, NO ZINC
Desco Statguard Low-Voc Floor Finish, 10L, NO ZINC
Desco Statguard Low-Voc Floor Finish, 10L, NO ZINC

Desco Statguard Low-Voc Floor Finish, 10L, NO ZINC

SKU DES10550
by Desco
$0.00 - $0.00
$0.00
$410.59
$410.59 - $410.59
$410.59
Statguard® Low-VOC is a static dissipative zinc free floor finish that will convert non-ESD flooring to an ESD protective floor. Statguard® Low-VOC floor finish will protect and maintain ESD permanent flooring such as vinyl composition tiles, sheet vinyl and rubber tiles. Statguard® Low-VOC floor finish provides a resistance range (1 x 106 to < 1 x 1010 ohms) and low charge generation (less than 100 volts) that meets or exceeds ANSI/ESD S20.20 required limits as an ESD protective floor or as a personnel grounding method. Statguard® Low-VOC is made with low volatile solvents in order to meet the requirements of CARB and other regional VOC regulations. Statguard® Low-VOC is free of zinc, VOCs, APEs, and other hazardous ingredients. This is important to users being monitored for zinc output, or those desiring to reduce the exposure of dangerous chemicals to workers and the environment. The coating resists abrasion and scuffing in order to maintain ESD performance and appearance. Statguard® Low-VOC is packaged in bag-in-boxes and lot coded for quality control.

Stock available: 2

Features & Benefits

Static Dissipative Zinc Free Floor FinishUsed to convert hard non-ESD floors to ESD protective flooring and for use in protecting and enhancing ESD permanent flooring (vinyl, VCT, rubber)Dissipative (10E7 - 10E9 ohms) Coating - ANSI/ESD S7.1 and ESD TR53 - Meets or exceeds ANSI/ESD S20.20 minimum requirements as an ESD protective floor or as a primary grounding methodLow Tribocharging (<100 volts) Coating - ANSI/STM 97.2 - Meets or exceeds ANSI/ESD S20.20 minimum requirements for charge generation on flooringLow-VOC - Meets CARB and other regional VOC requirements23% Solids- 2 Coat System** - Reduces labour needed for initial install and on-going maintenance of the floorBetter Hardness vs. Leading Competition – ASTM Standard D2134.93 - Resists wear in order to maintain ESD performance longerUL Listed for Slip Resistance - Tested by Underwriters Laboratory to their slip resistance standards to ensure employee safety and to mitigate user’s liability exposureLead-free RoHS CompliantMade In the United States of America

Specifications

Package: 10L (2.5Gal)Statguard® Low-VOC does not contain harmful chemicals:NO APE (alkyl phenol ethoxylates) surfactantsNO Carcinogens, Mutagens, or Reproductive ToxinsNO Ozone-depleting compoundsNO AmmoniaNO Heavy metals (Zinc Free)NO Flammable componentsNO Components toxic to aquatic life

Operators Manual