Skip to content
📞 Free NZ: 0800 227 548 | 🌎 Int: +64 (0) 3 302 8703 | ✉️ Contact Us
📞 Free NZ: 0800 227 548 | 🌎 Int: +64 (0) 3 302 8703 | ✉️ Contact Us
ONE TOUCH, Dissipative Orange HDPE Bottle w/Pump, 180mL
ONE TOUCH, Dissipative Orange HDPE Bottle w/Pump, 180mL
ONE TOUCH, Dissipative Orange HDPE Bottle w/Pump, 180mL

ONE TOUCH, Dissipative Orange HDPE Bottle w/Pump, 180mL

SKU DES35270
by Desco Menda
$0.00 - $0.00
$0.00
$56.00
$56.00 - $56.00
$56.00
Orange HDPE durAstatic® square shaped bottle with a One-Touch pump is suitable for many solvents. The One-Touch Pump has an opening in the centre of the dish to allow the fluid to seep back down into the bottle. HDPE durAstatic® bottles are dissipative and are designed to protect your valuable static sensitive printed circuitry No migratory additives - reduces the chance for contamination from the bottle Embossed with ESD Protective Symbol 6 oz. includes measurements on one side to see how much fluid is left in the bottle Dispenses approximately 0.2cc of liquid with each pump One-Touch Pump - there is an opening in the centre of the dish to allow the fluid to seep back down into the bottle Genuine Menda "dish-type" liquid dispenser pumps and bottle one-handed operation dispensing small amount of liquid into top dish Stainless steel pump includes spring-loaded lid to stay open or stay closed minimizing evaporation and odours Genuine Made in the United States of America Menda pump and bottle - accept no substitutes #Maintenance Pump Care: Some types of fluids may leave a residue in the mechanism of the dispenser. Over time, this can reduce the performance of the pump. Occasional cleaning is recommended to maintain your unit to original efficiency. Clean by flushing the mechanism thoroughly with warm soapy water. Flush the mechanism again with clean water to remove any soap residue. Do not boil or steam the dispenser. For long periods of inactivity, pumps should be flushed free of liquid and stored inverted in a dry place.

Stock available: 4

Features & Benefits

HDPE durAstatic® bottles are dissipative and are designed to protect your valuable static sensitive printed circuitryNo migratory additives - reduces the chance for contamination from the bottleEmbossed with ESD Protective Symbol6 oz. includes measurements on one side to see how much fluid is left in the bottleDispenses approximately 0.2cc of liquid with each pumpOne-Touch Pump - there is an opening in the centre of the dish to allow the fluid to seep back down into the bottleGenuine Menda "dish-type" liquid dispenser pumps and bottle one-handed operation dispensing small amount of liquid into top dishStainless steel pump includes spring-loaded lid to stay open or stay closed minimizing evaporation and odoursGenuine Made in the United States of America Menda pump and bottle - accept no substitutes

Specifications

Height:107mm - NOTE: Heights include the bottle with the dispenserSize: 180mls (6oz)Others sizes available on request: 118mls (4oz) & 236mls (8oz)Colour: OrangeOther colours available on request: Blue, Yellow & GreenPrint: NON PRINTEDOther prints available on request (See data sheets for examples):Acetone labelIPA labelFlux remover labelLong lasting dissipative properties: Rtt: 10E4 to <1 x 10E11 ohms tested per ANSI/ESD STM11.12 <2 second charge decay, tested per IEC 61340-5-1:1998Pump Material: Stainless-SteelLocks for Travel: NoNeck Size / Thread: 38-400Lid-Type: Cam-lock hinge lidGasket Material: LDPE

More Information

Pump Care:Some types of fluids may leave a residue in the mechanism of the dispenser. Over time, this can reduce the performance of the pump. Occasional cleaning is recommended to maintain your unit to original efficiency.Clean by flushing the mechanism thoroughly with warm soapy water. Flush the mechanism again with clean water to remove any soap residue. Do not boil or steam the dispenser.For long periods of inactivity, pumps should be flushed free of liquid and stored inverted in a dry place.

Technical Data Sheet (TDS)