Continuous Monitor , Dual Operator, Universal Power Adapter
SKU DES19656
by Baskiville
Order In
Original price
$0.00
-
Original price
$0.00
Original price
$0.00
Price on Request
$0.00
-
$0.00
Current price
Price on Request
Dual Operator Workstation Continuous Monitor - Continuously monitors the path-to-ground integrity of two operators and one ESD worksurface
Wave Distortion Technology - Provides stable continuous monitoring (versus pulsed or intermittent) of the wrist strap’s path-to-ground* and the presence of its 1 megohm safety resistor
IMPROVED Operator Alarm - Alarms when the operator unintentionally disconnects from the monitor or the connection between the banana plug and monitor’s jack is intermittent
NEW Park Delay Timer - Indicates the 8 second delay to disconnect and park the operator wrist cord
NEW Visual Status Display - Displays the operators’ and worksurface status: illuminates red when intermittent or failed connection occurs
NEW Mat Monitor Switch - Disables the worksurface monitor circuit when used in areas where there is no ESD worksurface
NEW Audible Alarm Adjustment - Sets the audible alarm volume from loud to louder
NEW 19323 Power Relay Accessory - Controls power to workbenches, hand tools, and other electronic devices dependent on the Dual Operator Continuous Monitor’s status
Park Snap - Allows the operator to disconnect (and park) a wrist strap when leaving the workstation without creating a false alarm
Single-wire Impedance Design - Meets ANSI/ESD S20.20 in accordance with ESD TR1.0-01-0
1.2 Volt Operator Test Voltage - Reduces the risk of electrical overstress (EOS) for the handling of sensitive components
<50 Millisecond Alarm Response Time - Identifies failures and intermittencies
Calibration Verification - Use the Desco 98221 Wave Distortion Monitor Verification Tester to check the test limits of Wave Distortion Monitors without removing them from their workstations
NIST Calibrated with Certificate Included - Calibrated with accepted procedures and standards traceable to the National Institute of Standards and Technology. For more information on the calibration of Desco products, see Calibration.
100-240VAC Safety Certified Power Adapter with IEC C14 Style Inlet - Connects to a power cord with an IEC C13 outlet connector. See items 50545 and 50546.
Made in the United States of America
Wave Distortion Technology - Provides stable continuous monitoring (versus pulsed or intermittent) of the wrist strap’s path-to-ground* and the presence of its 1 megohm safety resistor
IMPROVED Operator Alarm - Alarms when the operator unintentionally disconnects from the monitor or the connection between the banana plug and monitor’s jack is intermittent
NEW Park Delay Timer - Indicates the 8 second delay to disconnect and park the operator wrist cord
NEW Visual Status Display - Displays the operators’ and worksurface status: illuminates red when intermittent or failed connection occurs
NEW Mat Monitor Switch - Disables the worksurface monitor circuit when used in areas where there is no ESD worksurface
NEW Audible Alarm Adjustment - Sets the audible alarm volume from loud to louder
NEW 19323 Power Relay Accessory - Controls power to workbenches, hand tools, and other electronic devices dependent on the Dual Operator Continuous Monitor’s status
Park Snap - Allows the operator to disconnect (and park) a wrist strap when leaving the workstation without creating a false alarm
Single-wire Impedance Design - Meets ANSI/ESD S20.20 in accordance with ESD TR1.0-01-0
1.2 Volt Operator Test Voltage - Reduces the risk of electrical overstress (EOS) for the handling of sensitive components
<50 Millisecond Alarm Response Time - Identifies failures and intermittencies
Calibration Verification - Use the Desco 98221 Wave Distortion Monitor Verification Tester to check the test limits of Wave Distortion Monitors without removing them from their workstations
NIST Calibrated with Certificate Included - Calibrated with accepted procedures and standards traceable to the National Institute of Standards and Technology. For more information on the calibration of Desco products, see Calibration.
100-240VAC Safety Certified Power Adapter with IEC C14 Style Inlet - Connects to a power cord with an IEC C13 outlet connector. See items 50545 and 50546.
Made in the United States of America