Skip to content
📞 Free NZ: 0800 227 548 | 🌎 Int: +64 (0) 3 302 8703 | ✉️ Contact Us
📞 Free NZ: 0800 227 548 | 🌎 Int: +64 (0) 3 302 8703 | ✉️ Contact Us
Fraser Static Gererator 50KVA Bar 500mm
7130 static generator.jpg
7130 static generator.jpg

Fraser Static Gererator 50KVA Bar 500mm

SKU FRA7150-500
by Fraser
Sold out
$0.00 - $0.00
$0.00
$0.00
$0.00 - $0.00
$0.00
The 7150 Generator Bars are charging electrodes which provide a safe, controllable, reliable and cost-effective method of applying static charge for temporary adhesion in industry. 7150 Generator Bars , have connectors for older 50kV generators. These robust static generation bars meet the temporary adhesion requirements of high performance machinery. Robust, with all parts completely encapsulated for reliability and safety Individually resistively coupled tungsten emitters for a long, reliable life Standard 10 mm emitter pitch for even charge application Cable protected with flexible nylon conduit, cable exit 180° or 90° Using with IONFIX Generators gives the operator full control and operational feedback 7130 / 7150 / 7160 Generator Bars are used in a wide range of electrostatic adhesion applications, including interleaving, pinning, laminate worktops, labelling, in-mould labelling (IML), wrapping, chill rollers and bagmaking. Options 7130-/50-/60-T5: Tungsten emitters at 5 mm pitch, 400 Mohm resistance. 7130 / 7150 / 7160 Emitter Mask (Part No. 715003): to cover live emitter pins where they are not needed. 1 m length to cut as required. See separate Datasheet. 90° cable outlet.
Features & Benefits

Safe, controllable, and reliable static generation for temporary adhesionRobust and fully encapsulated construction for durability and safetyIndividually resistively coupled tungsten emitters for long service lifeStandard 10 mm emitter pitch for uniform charge applicationCable protected with flexible nylon conduit; 180° or 90° exit optionsCompatible with older 50 kV Fraser generatorsFull operational control and feedback when used with IONFIX generatorsSuitable for a wide range of industrial electrostatic adhesion applicationsOptional emitter masks allow selective coverage of live emitters

Specifications

ConstructionExtruded FR-ABS with ABS end caps, epoxy resin. Tungsten emitters at 10 mm pitch.Dimensions20 x 69 mm (W x H).Available Lengths: minimum 200 mm, then in 100 mm steps to 4000 mm.Active length is 70 mm less than overall length.A 60 mm option is available for specialist applications.Cable2 m of 60 kV cable. Longer lengths can be specified at time of order. Cable terminates in HV connector. Protective nylon conduit on cable. Minimum bend diameter 100 mm.Safety170 MOhm resistance for safe operation.EnvironmentalClean, dry and oil-free location.Temperature: 0 - 60 °C, 70 % rH non-condensing max.Generator7150 for 50 kV generators.State generator model at time of order.CertificationCE.Options7130-/50-/60-T5: Tungsten emitters at 5 mm pitch, 400 Mohm resistance. Emitter Mask (Part No. 715003) to cover live emitter pins where they are not needed - see separate Datasheet. 1 m length to cut as required. 90° cable outlet.