Hakko FA431 Fume Extraction

Hakko FA431 Fume Extraction System 240V In Addition To FA430, a quiet and powerful smoke absorber, FA431, a new smoke absorber with long life filter's and a remote control, is now in the line-up. The Hakko FA-431 is a volume fume extractor unit with pre-HEPA, and maximum 2 ports/2 stations, no arms, 120W. Hakko FA-431 Features: Designed for use at soldering stations where it extracts contaminated air directly from the source and transfers it to the unit by flexible or rigid ducts Powerful suction, quiet operation Three airflow adjustment modes: High, medium, lo Two filters inside the unit remove contaminants from the air, then return the purified air to the area where the FA-431 is located Pre-filter made from treated polyester material that removes coarse particles like dust and subsequently extends the life of the main HEPA filter HEPA filter made from fiberglass paper medium and provides the greatest amount of surface area within the volume of the filter case Standard filters contain an activated carbon element with absorption ratings of 80-85% and are also designed to extend the life of the main HEPA filter Filter efficiencies are greater than 98% at 0.3 microns Special filter replacement notification function detects the fan speed and notifies the operator of the appropriate time to replace the filters via indicator lights on the front panel Power consumption: 120W Maximum air flow: - One port: 145 CFM (4.1 cu.m./min.) - Two ports: 167 CFM (4.7 cu.m./min.) Noise level: 44-53 dB @1m Dimensions: 13.0" W x 14.4" H x 13.5" D (330 x 366 x 343 mm) Weight (with filters): Approximately 16.5 lbs. (7.5 kgs) Hoses sold separately HKC1571 for the rectangular nozzle and HKC1572 for the Round Nozzle NOTE: Not for use with flammable vapours