PAINT, STATGUARD
Conductive Epoxide Polymer Floor Coating
LIGHT GREY
5US GAL (20Litres)
Conductive Epoxide Polymer Floor Coating
Provides a flooring surface that does not generate a static charge and will act as part of the path-to-ground for an operator wearing ESD footwear.
Conductive (Rtt and Rtg 1 x 104 to < 1 x 107 ohms per ANSI/ESD STM7.1 or IEC 61340-4-1)
The surface resistance range will remain low enough to act as a path-to-ground with normal dirt and grime build-up on a floor and meet the required limits of ANSI/ESD S20.20 (< 1 x 109 ohms) for a footwear / flooring system.
One Coat, 2-part, Water-Based Epoxy System
Mix 4 gallon pre-measured part A and B together and install with squeegee and nap roller.
50% Solids by Volume
Reduces dry time.
Estimated Coverage Per Gallon = 200 sq ft. at 8 mil (0.008" thick).
= 18.58 m2
Or = about 93 m2 per 5 Gal/20 l
Made in the United States of America