We stock a wide range of Lead Benders, formers and straighteners from international and high quality brands including: Olamef, Xuron and Hakko.
We have component cutters for radial, axial and vertical lead forming that are manual or fully automatic. We also sell a Varity of lead straighteners.
Contact us about enquires or to request a quote.
Lead Benders & Straighteners
Radiused edges, eliminates scarring of leads. Graduated in .050" increments;
Made of high impact red cycolac plastic. Size: 5-1/2" long. 1...
Made of high impact red cycolac plastic. Size: 5-1/2" long. 1...
Radiused edges, eliminates scarring of leads. Graduated in .050" increments;
Made of high impact red cycolac plastic. Size: 5-1/2" long. 1...
Made of high impact red cycolac plastic. Size: 5-1/2" long. 1...
Calliper Lead Forming Tool
Forms lead bends on all axial lead components, mounted vertical or horizontal. Set screw allows locking of the...
Forms lead bends on all axial lead components, mounted vertical or horizontal. Set screw allows locking of the...
Countersunk Screw M2 x 4
262.3000
Item 09.3
262.3000
Item 09.3
Cutbend Tool VB12
Left Hand Support 320-1031
Item 08.2 in Data Sheet
#Data Sheet
Left Hand Support 320-1031
Item 08.2 in Data Sheet
#Data Sheet
Item 8 on pdf 420-1006
#Data Sheet
#Data Sheet
Right Hand Guide Plate for VB12 320.1021
Item 08.2
#Datasheet
Item 08.2
#Datasheet
Hakko Lead Former 153
Lead cutter and former for axial components
Lead cutting operation for taped components can be continuously perfo...
Lead cutter and former for axial components
Lead cutting operation for taped components can be continuously perfo...
Hakko Lead Former 154
Lead cutter and former for axial components
Lead cutting operation for taped components can be continuously perfo...
Lead cutter and former for axial components
Lead cutting operation for taped components can be continuously perfo...
Hakko FT100 Lead Straightener
A low cost, high-performance tool for reforming IC and LSI leads.
Speed IC and LSI insertion
No more brok...
A low cost, high-performance tool for reforming IC and LSI leads.
Speed IC and LSI insertion
No more brok...
Hakko FT200 Lead Straightener
A low cost, high-performance tool for reforming IC and LSI leads.
Speed IC and LSI insertion
No more brok...
A low cost, high-performance tool for reforming IC and LSI leads.
Speed IC and LSI insertion
No more brok...
TP6
Cutting and bending machine for taped axial components
With 400200 Real holder
And 51.0100CS10 Feeder for loose comp
20.OL01
ST...
Cutting and bending machine for taped axial components
With 400200 Real holder
And 51.0100CS10 Feeder for loose comp
20.OL01
ST...
Olamef Manuel Cut Bend Machine
Cut and bend machine for axial components.
The standard version is designed for leads with lead diam...
Cut and bend machine for axial components.
The standard version is designed for leads with lead diam...
Designed for cutting and bending taped axial components with lead diameter from 0.4mm to 1.3mm (.015 to 0.51''). Operation quota are set up ...
The machine Model TP6/R is designed for cutting radial components on tape.
It can be supplied in two versions for two types of tape:i.e. w...
It can be supplied in two versions for two types of tape:i.e. w...
The TP6/R-EC machine is designed for cutting taped radial components.
The quality and re- liability of this machine allows the customer to...
The quality and re- liability of this machine allows the customer to...
Olamef Manuel Cutting Machine Taped Radial Components
TP6/R-EC
TAPE HOLE PITCH 15 MM
TP6/R/22/EC
TP6/R-EC
TAPE HOLE PITCH 15 MM
TP6/R/22/EC
O-TP/LN-500/1
The TP/LN-500 is a pneumatic machine to cut loose radial components by using a guillotine type lower blade. It can handle ...
The TP/LN-500 is a pneumatic machine to cut loose radial components by using a guillotine type lower blade. It can handle ...
O-TP/LN-500/2
The O-TP/LN-500 is a pneumatic machine to cut loose radial components by using a guillotine type lower blade. It can handl...
The O-TP/LN-500 is a pneumatic machine to cut loose radial components by using a guillotine type lower blade. It can handl...
Stationary Plate for the O-TP/LN-500/1
52mm x 43mm Cutting area. 3.2mm High ( Cut length of lead )
52mm x 43mm Cutting area. 3.2mm High ( Cut length of lead )
"U"BENDING ONLY AND CUT
DIE ASSEMBLY TP6/PR-F/1 MACHINE 43.OL01
DIE ASSEMBLY TP6/PR-F/2 MACHINE 43.OL02
DIE ASSEMBLY TP6/PR-F/3 MACHINE 4...
DIE ASSEMBLY TP6/PR-F/1 MACHINE 43.OL01
DIE ASSEMBLY TP6/PR-F/2 MACHINE 43.OL02
DIE ASSEMBLY TP6/PR-F/3 MACHINE 4...
Olamef TP6/PR-F3 Manual Cut. Bend Form Machine Extra Reinforced Without Die Assembly. Cut, bend and form machine for axial components.
Ver...
Ver...
Olamef TP6/PR-F3 Manual Cut. Bend Form Machine Extra Reinforced Without Die Assembly. Cut, bend and form machine for axial components.
Ver...
Ver...
Olamef Die Assembly Stand Off 3,5mm, For leads, TP6/PR-F3 43.OL03
#Specifications
For Leads 1-1,3 mm Diameter
#Specifications
For Leads 1-1,3 mm Diameter
Upper Left Cutting Wheel For TP/TC4 model OL21/22
Right Lower Cutting Wheel For TP/TC4 model OL21/22
The TP6/V/21 model is designed for cutting and bending taped axial components for vertical mounting. It operates components with lead Ø fro...
TP6/V/1-EC PREFORM VERT LEAD BENDING MACHINE
Piergiacomi PTR30L Wire Bending Tool
Was Product Code: PIE-PTR30L
PTR 30 L: Tool that forms the component wire in a L shape and cuts ...
Was Product Code: PIE-PTR30L
PTR 30 L: Tool that forms the component wire in a L shape and cuts ...
Component Lead Cutting/Bending for Axial/Radial Taped Components 1.2mm type
#Features & Benefits
The CUTBEND can easily be adjusted and ...
#Features & Benefits
The CUTBEND can easily be adjusted and ...
Component Lead Cutting
Schleuniger.Cutting device, 0.8 / radial, pitch 12.7 mm
Schleuniger.Cutting device, 0.8 / radial, pitch 12.7 mm
Universal QFP tool enables you to rework and align bent pins on all sizes QFP and TQFP. Pitch 0.4mm to 1.0mm
Durable metal template inclu...
Durable metal template inclu...
573 Xuro-Former Lead Forming Tool
The patented, original strain relief forming hand tool. Radius and depth of bend are controlled by a sim...
The patented, original strain relief forming hand tool. Radius and depth of bend are controlled by a sim...
573L Xuro-Former Lead Forming Tool for wire size up to 0.050"
The patented, original strain relief forming hand tool. Radius and depth of...
The patented, original strain relief forming hand tool. Radius and depth of...
Replacement cutter blade for the micro- pneumatic cutter XUR590LP
Cutting Wheel for Variocut
320.3004
320.3004
Olamef Complete Component. Body Guide For TP6/PR-F
Olamef Die Cast Reduced Pitch
Olamef drive belt
Schleuniger, Cut Bend, 1 pair Cutters With Screws
For CutBend Model VB-08
Manufacture: Schleuniger
For CutBend Model VB-08
Manufacture: Schleuniger
Schleuniger, Cut Bend, Left hand Cutting Unit 1mm.
Was Product Code: MET-SCH4201012
Was Product Code: MET-SCH4201012
Schleuniger, Cut Bend, Right hand Cutting Unit 1mm.
Was Product Code: MET-SCH4201013
Was Product Code: MET-SCH4201013
Page 1 of 1
40+ years in Business
Shop on line