Discontinued Equipment
Anti-Wicking Tool, AW30
Full Length: 127mm
Conductor Contact Length: 0.79mm
Hole Diameter: 0.25 - 0.28mm
Bullet-shaped head grips ...
Full Length: 127mm
Conductor Contact Length: 0.79mm
Hole Diameter: 0.25 - 0.28mm
Bullet-shaped head grips ...
Conical 3mm
Tip for WELLER WSTA-5 JUMBO PYRO-PEN
Tip for WELLER WSTA-5 JUMBO PYRO-PEN
STAND WMP WDH20,51512299
Has adjustable tilt angle in four positions ranging from 30-80 degrees
Fits Tool(s): WMP
Was 272SO475
The Pace Handle Extractor SX20V (1119-0050-P1) is a precision-engineered replacement handle designed for use with the Pace SX-20V desolderin...
1121-0130-P5 Package of 5
1/8" ( 3.175mm ) Chisel Tip
1/8" shank (3.175 mm)
For use in PACE SP-1A, IR-65A, IR-55A, IR-25 and IR-3...
1/8" ( 3.175mm ) Chisel Tip
1/8" shank (3.175 mm)
For use in PACE SP-1A, IR-65A, IR-55A, IR-25 and IR-3...
1121-0131-P5 Package of 5
1/16" ( 1.58mm ) Chisel Tip
1/8" shank (3.175 mm)
For use in PACE SP-1A, IR-65A, IR-55A, IR-25 and IR-...
1/16" ( 1.58mm ) Chisel Tip
1/8" shank (3.175 mm)
For use in PACE SP-1A, IR-65A, IR-55A, IR-25 and IR-...
1121-0233-P5 Package of 5
3/32" Single side chisel tip, 1/8" shaft
For use in PACE SP-1A and Micro Soldering handpieces
Other 1121...
3/32" Single side chisel tip, 1/8" shaft
For use in PACE SP-1A and Micro Soldering handpieces
Other 1121...
The Pace 1123-0003-P1 Swab Pre Wrap is a high-quality precision cleaning swab designed for effective removal of contaminants, flux residues,...
The Pace Gasket 1213-0019-P2 is a precision-engineered sealing component designed to maintain airtight and secure connections in Pace equipm...
The Pace Filter Felt P2 (Part Number: 1309-0015-P2) is a high-quality felt pre-filter designed for use in Pace soldering, desoldering, and f...
The Pace Baffle Flux Trap (Part Number: 1309-0031-P50) is a replacement consumable designed to trap and contain solder flux residues generat...
The Pace 1405-0341-P1 Screw Nylon is a precision-engineered fastener designed for use in soldering, desoldering, and rework equipment assemb...
The PACE 4010-0077-P1 Rear Seal Assembly is a genuine replacement part designed for the PACE SX-50 Desoldering Handpiece. This rear seal mai...
This element has two wires and suits the PACE SX20 and SX25 desolder handpieces
Suits PACE IR55 soldering iron. Has two wires plus earth wire
21 Volt
35 Watt
21 Volt
35 Watt
In New Zealand Baskiville are authorised agents for Pace
Baskiville stock and support Pace products
Contact us on 0508-227-548 for more pr...
Baskiville stock and support Pace products
Contact us on 0508-227-548 for more pr...
Economy Filter for Evac 105/200 & 250
Designed for coarse particle capture, sanding applications, benchtop machining operations, and grin...
Designed for coarse particle capture, sanding applications, benchtop machining operations, and grin...
DISCONTINUED product
PCS is a peelable coating mask which has been designed as an improved version of Electrolube's PCM with an extended ...
PCS is a peelable coating mask which has been designed as an improved version of Electrolube's PCM with an extended ...
The Hakko A1313 Heating Element is a genuine replacement part for the Hakko 809 desoldering handpiece. It delivers consistent heat output fo...
2053 GROUNDING ASSEMBLY WITH RESISTOR - Obsolete once sold
1121-0463-P1 Package of 1
1.02mm x 2.16mm (0.040" x 0.085") Long Life Desoldering tip
For use in a PACE SX-70 handpiece
Other 1121 ...
1.02mm x 2.16mm (0.040" x 0.085") Long Life Desoldering tip
For use in a PACE SX-70 handpiece
Other 1121 ...
1121-0551-P1 Package of 1
26.2mm x 26.2 mm (1.05" x 1.05") PQFP 132 Removal Tip
For use in a PACE DTP-80 Dual ThermoPik handpiece
O...
26.2mm x 26.2 mm (1.05" x 1.05") PQFP 132 Removal Tip
For use in a PACE DTP-80 Dual ThermoPik handpiece
O...
1121-0552-P1 Package of 1
30.7 mm X 30.7 mm (1.21" x 1.21") PQFP 160/208 removal tip
For use in a PACE DTP-80 Dual ThermoPik handpiece...
30.7 mm X 30.7 mm (1.21" x 1.21") PQFP 160/208 removal tip
For use in a PACE DTP-80 Dual ThermoPik handpiece...
1121-0593-P1 Package of 1
42.4mm x 42,4mm (1.67" x 1.67") PQFP-304 removal tip
For use in a PACE DTP-80 Dual ThermoPik handpiece
Ot...
42.4mm x 42,4mm (1.67" x 1.67") PQFP-304 removal tip
For use in a PACE DTP-80 Dual ThermoPik handpiece
Ot...
1121-0596-P1 Package of 1
27mm x27mm (1.06" x 1.06") BGA-225 Removal tip
For use in a PACE TP-80 Dual ThermoPik handpiece
Other 112...
27mm x27mm (1.06" x 1.06") BGA-225 Removal tip
For use in a PACE TP-80 Dual ThermoPik handpiece
Other 112...
Clamp, Flat Chord and Tubing for SX30 Desolder handpiece
Packet of 6
Packet of 6
Front seal for PACE SX200 black handpiece as used on PRC150 machines.
The Pace C Spring (Part Number: 1221-0022-P1) is a precision-engineered replacement component designed for use in Pace soldering and rework ...
The PACE 1221-0049-P1 Spring is a precision component used in PACE rework and soldering tools. It provides the necessary tension or compress...
1221-0144-P1 Package of 1
Open spring for a PS cubby
Open spring for a PS cubby
The Pace Knob MP1E (1222-0022-P1) is a genuine replacement control knob designed for use with Pace MP1E and compatible soldering/desoldering...
The Pace Knob ST-20E (1222-0092-P1) is a genuine replacement control knob designed specifically for the Pace ST-20E soldering station. Engin...
The 1289-0002-P1 Copper Foil Tape (5' Roll) is a conductive adhesive tape designed for electrical and electronic applications requiring EMI/...
The Pace Filter Felt P4 (Part Number: 1309-0005-P4) is a high-efficiency felt pre-filter designed for use in Pace soldering, desoldering, an...
The Pace Filter Exhaust Micro (Part Number: 1309-0030-P1) is a high-efficiency replacement filter designed for use in Pace soldering and rew...
Vanes For Rotary Vacuum for PRC-351
Complete Kit 6993-0033
Packet of 4
Complete Kit 6993-0033
Packet of 4
The Pace Adapter Housing (Part Number: 1338-0007-P1) is a durable and precisely engineered component manufactured by Pace, designed to secur...
The PACE 6020-0008-02-P1 ZPS Board (PPS-101B) is a replacement circuit board designed for the PACE PPS-101B power system. It manages interna...
The PACE 6020-0009-P1 ZPS Board (PRC-151BE) is a replacement control / logic printed circuit board used within the PRC-151BE system. It hand...
The PACE 6020-0013-P1 ZPS Board is a control / regulation printed circuit board used inside the PPS-101BE power/control system. It manages i...
The Pace PC Board MBT-100E (Part Number: 6020-0020-P1) is a genuine replacement printed circuit board designed for use in Pace MBT-100E sold...
The Pace PCB Main MBT-210E (Part Number: 6020-0051-P1) is the primary control board designed specifically for the Pace MBT-210E soldering an...
The Pace PCB Display MBT-210E (Part Number: 6020-0052-P1) is a genuine Pace replacement printed circuit board assembly designed for the MBT-...
Pace 7011-0001 kit
1x 1325-0009 control assembly
1x 6011-0001 spray assembly
...
1x 1325-0009 control assembly
1x 6011-0001 spray assembly
...
DISCONTINUED Product
Suits HW series, HW 50, HW 100, HW200 that has a red colour on the
plug cord. Will not fit on later Intelliheat ir...
Suits HW series, HW 50, HW 100, HW200 that has a red colour on the
plug cord. Will not fit on later Intelliheat ir...
SNIP MULTI - PURPOSE JBS 50MM CUT 205MM
Features
Precision ground 450J2 Stainless blades, one blade serrated helps prevent slippage ...
Features
Precision ground 450J2 Stainless blades, one blade serrated helps prevent slippage ...
NO LONGER AVAILABLE
Weller LT S Soldering tip
Fits Weller WXP 80, WP 80 and WSP 80
Conical
0.4 mm point
20.0mm length
Designed f...
Weller LT S Soldering tip
Fits Weller WXP 80, WP 80 and WSP 80
Conical
0.4 mm point
20.0mm length
Designed f...
Antex XS25 Element
Product Code Was: A-XS25E
230 volt 25 watt,
Suits XS irons with 4.5mm ID tips
Product Code Was: A-XS25E
230 volt 25 watt,
Suits XS irons with 4.5mm ID tips
This product has been discontinued
Pace TD100 (handpiece) blue comfort grip
For new applications you also have to replace the cubby inse...
Pace TD100 (handpiece) blue comfort grip
For new applications you also have to replace the cubby inse...
Discontinued Product
A Pace 1121 series desoldering tip designed for use with PACE Micro soldering ,SX40 and SX50 handpieces
Sold as a Pac...
A Pace 1121 series desoldering tip designed for use with PACE Micro soldering ,SX40 and SX50 handpieces
Sold as a Pac...
NO LONGER AVAILABLE
Track Pad frame, choice of one size W= .8mm
Track Pad frame, choice of one size W= .8mm
The Pace Power Module with 8 Heat Level, Black (Part Number: 1207-0362-07-P1) is a genuine replacement module designed for use with compatib...
The Pace Power Module 1207-0362-08-P1 is a genuine replacement module engineered for Pace soldering systems. It provides 8.5 heat levels for...
This product is No Longer Available
Handpiece to suit ST series, ST30, ST50, ST70 and the soldering side of the
MBT 301 and MBT350. Has...
Handpiece to suit ST series, ST30, ST50, ST70 and the soldering side of the
MBT 301 and MBT350. Has...
TD-100 with Tip & Tool Stand (TempWise) RED PLUG ONLY
NLA
TD-100 ThermoDrive Handpiece for HeatWise and TempWise systems only.
#Fits...
NLA
TD-100 ThermoDrive Handpiece for HeatWise and TempWise systems only.
#Fits...
ST30 Soldering Station, Cubby,
NLA
#Replacement
ST30 Soldering Station with TD-100 Iron
There has been an upgrade or too...
NLA
#Replacement
ST30 Soldering Station with TD-100 Iron
There has been an upgrade or too...
Power supply Only, you chose which handpiece which best suits your application
NLA
#Replacement
ST30 Soldering Station
The...
NLA
#Replacement
ST30 Soldering Station
The...
ST50 Soldering Station, Cubby
NLA
#Replacement
ST50 Soldering Station with TD-100 Iron
There has been an upgrade or too
H...
NLA
#Replacement
ST50 Soldering Station with TD-100 Iron
There has been an upgrade or too
H...
ST 50E SOLDERING STATION, Power Supply Only
NLA
#Replacement
ST50 Soldering Station
There has been an upgrade or too
Have ...
NLA
#Replacement
ST50 Soldering Station
There has been an upgrade or too
Have ...
No Longer available , Now use ST 75 Part Number 8007-0520
Featuring a powerful, multistage venturi that is powered ...
Featuring a powerful, multistage venturi that is powered ...
ST70, complete with TD100 handpiece and cubby
NLA
#Replacement
ST70 Soldering Station with TD-100 Iron
There has been an upg...
NLA
#Replacement
ST70 Soldering Station with TD-100 Iron
There has been an upg...
ST 70E SOLDERING STATION, Power Supply Only
NLA
#Replacement
ST70 Soldering Station
There has been an upgrade or too
Have ...
NLA
#Replacement
ST70 Soldering Station
There has been an upgrade or too
Have ...
DISCONTINUED
ST75E Desolder/ Solder Machine c/w SX100 Handpiece, Soldering handpiece sold separately.
ST 75 System
A single channel. ...
ST75E Desolder/ Solder Machine c/w SX100 Handpiece, Soldering handpiece sold separately.
ST 75 System
A single channel. ...
This unit has the PS-90 handpiece instead of the cartridge technology TD100 handpiece fitted to the 8007-0514-P1 unit
The ST 50 is a sing...
The ST 50 is a sing...
New model has been released , The IR3100,
8007-0587 is the latest vesrion of this proven rework station.
The IR 3000 is ...
8007-0587 is the latest vesrion of this proven rework station.
The IR 3000 is ...
DISCONTINUED product
The IR 1000 is capable of installing and removing passives, QFPs, SOICs, PLCCs, MLFs, TSOPs, and coarse pitched BGAs...
The IR 1000 is capable of installing and removing passives, QFPs, SOICs, PLCCs, MLFs, TSOPs, and coarse pitched BGAs...
WJS 100 HIGH OUTPUT Soldering Station with TD-100 Iron and Standard Cubby.
NLA
WJS 100 HIGH OUTPUT
NLA
#Replacement
Soldering St...
NLA
WJS 100 HIGH OUTPUT
NLA
#Replacement
Soldering St...
WJS 100 HIGH OUTPUT
NLA
# Replacement
Soldering Station with TD-100 Iron and Instant Setback Cubby. ( ISB)
There has been an...
NLA
# Replacement
Soldering Station with TD-100 Iron and Instant Setback Cubby. ( ISB)
There has been an...
DISCONTINUED PRODUCT - Now use 8007-0573
ST 1600 - Programmable Pre-Heater with Built-in PCB Holder
The most powerful 4-Zone Pre-heat...
ST 1600 - Programmable Pre-Heater with Built-in PCB Holder
The most powerful 4-Zone Pre-heat...
ST50 Soldering Station, ISB Cubby,
No longer manufactured
NLA
# Replacement
Soldering Station with TD-100 Iron and Instant Setback C...
No longer manufactured
NLA
# Replacement
Soldering Station with TD-100 Iron and Instant Setback C...
No Longer Available
Sleek, incredibly low working height improves operator comfort and reduces fatigue, perfect for under microscope
Int...
Sleek, incredibly low working height improves operator comfort and reduces fatigue, perfect for under microscope
Int...
Discontinued. Replacement is 8883-0922-P1 HEPA Combo Filter
Filter General Purpose Main for AE 105/200, 150 & 250 (New Model) Includes 1...
Filter General Purpose Main for AE 105/200, 150 & 250 (New Model) Includes 1...
Hepa/Gas Filter For V Filter Multi II - Obsolete
High Capacity Pre Filter for 105/200 & 250
Recommended for soldering application where heavy volumes of fumes are generated or where ope...
Recommended for soldering application where heavy volumes of fumes are generated or where ope...
Adhesive Filter for Evac 105, 200 & 250
REPLACEMENT # 8883-0952
Recommended for any bench-top application utilising adhesives, solvents...
REPLACEMENT # 8883-0952
Recommended for any bench-top application utilising adhesives, solvents...
High Capacity Pre Filter for 105/200 & 250 Rev 2
Recommended for soldering application where heavy volumes of fumes are generated or wher...
Recommended for soldering application where heavy volumes of fumes are generated or wher...
High Capacity Pre Filter for 105/200 & 250 Rev 2. Optional Extended Life Filter
Recommended for soldering application where heavy volumes...
Recommended for soldering application where heavy volumes...
DISCONTINUED use 8888-0305-P1 (bundle units w/ flex arm and hose)
Compact Fume Extraction System with a Powerful Brushless Motor
The b...
Compact Fume Extraction System with a Powerful Brushless Motor
The b...
NLA
The Arm-Evac 50 is a unique, portable, cost-effective, bench-top fume
extractor that provides wide area fume extraction or highl...
DISCONTINUED use 8889-0300-P1 (bundle units w/ flex arm and hose)
Fume Extraction for Light-Duty Production and Highly Customizable
The ...
Fume Extraction for Light-Duty Production and Highly Customizable
The ...
DISCONTINUED use 8889-0350-P1 (bundle units w/ flex arm and hose)
High-Capacity Fume Extractoion System
The Arm-Evac 250 is ideal for he...
High-Capacity Fume Extractoion System
The Arm-Evac 250 is ideal for he...
The American Beauty V3700 Voltage Controller is a reliable and durable power control solution designed to regulate the voltage supplied to s...
500 Grams Tub, not syringe as shown
MOQ 40 Tubs
ALPHA OM-6106, is a low residue, no-clean solder paste designed to maximize SMT line...
MOQ 40 Tubs
ALPHA OM-6106, is a low residue, no-clean solder paste designed to maximize SMT line...
DISCONTINUED product
Sold in packets of 200 Bags which have 0.5 grams in each bag.
Was Part Number CP13847
Bags are 35mm x 16mm
...
Sold in packets of 200 Bags which have 0.5 grams in each bag.
Was Part Number CP13847
Bags are 35mm x 16mm
...
Discontinued Product
Replacemnet p/n BAS13849500
Desiccant Pack of 100 x 5 Gram Bag Silica Gel
#Features & Benefits
Comply with FDA ...
Replacemnet p/n BAS13849500
Desiccant Pack of 100 x 5 Gram Bag Silica Gel
#Features & Benefits
Comply with FDA ...
Unable to source anymore
Torx Power Bit T8, 50mm with Security Hole
Torx Power Bit T8, 50mm with Security Hole
Unable to source anymore
Torx Power Bit T8, 70mm with Security Hole
Torx Power Bit T8, 70mm with Security Hole
Unable to source anymor
Torx Power Bit T10, 70mm with Security Hole
Torx Power Bit T10, 70mm with Security Hole
Unable to source anymore
Torx Power Bit T15, 70mm with Security Hole
Torx Power Bit T15, 70mm with Security Hole
Unable to source anymore
Torx Power Bit T20, 70mm with Security Hole
Torx Power Bit T20, 70mm with Security Hole
Baskiville Offer a Calibration Testing of CE type ionisers at your place or ours.
They have the 1/0 Port to allow this.
CE Ionisers can be...
They have the 1/0 Port to allow this.
CE Ionisers can be...
No longer available
A two pot mix of powder and liquid used to plate PCB's with liquid Tin. 120 Gram container
Enplate Tin-421
A two pot mix of powder and liquid used to plate PCB's with liquid Tin. 120 Gram container
Enplate Tin-421
NLA
Powder ONLY used to plate PCB's. 120 Gram container
Enplate Tin-421
Powder ONLY used to plate PCB's. 120 Gram container
Enplate Tin-421
Identification Label that is round 9 mm with a red arrow, that can be used to show faults
or identify some part of a board. Sticky back. C...
or identify some part of a board. Sticky back. C...
NLA
Watchmakers Sight Savers Eye Loupe 10x magnification
Watchmakers Sight Savers Eye Loupe 10x magnification
NO LONGER AVAILABLE
Brady Identification Labels, 3.2mm x 4.8mm, Black (Arrow) on Yellow
Description
* LABEL, INSPECTION ARROW, ...
Brady Identification Labels, 3.2mm x 4.8mm, Black (Arrow) on Yellow
Description
* LABEL, INSPECTION ARROW, ...
Features And Benefits
Was Part Number CP50597
* Portable Electrostatic Meter for ESD Testing of Static Fields
An effective ...
Was Part Number CP50597
* Portable Electrostatic Meter for ESD Testing of Static Fields
An effective ...
IONIZER, OVERHEAD, CE 48 INCH 220VAC NIST
Was Product Code CP50609
# Emitter cassettes* slide out easily for cleaning and replacement ...
Was Product Code CP50609
# Emitter cassettes* slide out easily for cleaning and replacement ...
Statguard Low-Voc Floor Finish, 2.5 Gal- NO ZINC
Was Part Number CP81012
# Zinc-free
For companies wanting to reduce discharge of z...
Was Part Number CP81012
# Zinc-free
For companies wanting to reduce discharge of z...
Wescorp Antistatic Cellulose Clear Tape 1/2 Inch Wide x 36 Yards With 1 Inch Paper Core
Was Product Code CP81200
* Low Charging Transp...
Was Product Code CP81200
* Low Charging Transp...
CP79209 - TAPE, WESCORP, CLEAR, ESD W/ SYMBOLS
, 1/2INx72YDS, 3IN CORE
# Ideal in packaging for container sealing, static shielding bag ...
, 1/2INx72YDS, 3IN CORE
# Ideal in packaging for container sealing, static shielding bag ...
DISCONTINUED PRODUCT
Quadra Magnifier has an extra wide, 3 diopter (1.75X), rectangular glass lens, providing a superb panoramic view. Hi...
Quadra Magnifier has an extra wide, 3 diopter (1.75X), rectangular glass lens, providing a superb panoramic view. Hi...
Economy, Adjustable, Blue, Wrist Strap, 6 ft. Coil Cord, 4mm Snap
Obsolete
*Fully adjustable for consistent comfortable skin contact ...
Obsolete
*Fully adjustable for consistent comfortable skin contact ...
NLA
Desco Trustat Wrist Strap Adjustable Blue 1.8m (6ft) Coil Cord, 4mm snap
Product Code Changed To: USUC-WS2ADB
This wristband is...
Discontinued. Replacement part number DES75005
Desco 04584 Disposable ESD Bootie is designed to be worn by personnel grounded via a Floor...
Desco 04584 Disposable ESD Bootie is designed to be worn by personnel grounded via a Floor...
Attention sign indicating the existence of a static safeguarded work area
#ESD Attention Statement
ATTENTION
STATIC SAFEGUARDED WORK A...
#ESD Attention Statement
ATTENTION
STATIC SAFEGUARDED WORK A...
Reztore® Surface & Mat Cleaner is a liquid cleaner used to remove dust, grease, grime, fingerprints, and solder flux from all surfaces used...
NLA
Reztore® Surface & Mat Cleaner is a liquid cleaner used to remove dust, grease, grime, fingerprints, and solder flux from all surfac...
Reztore® Surface & Mat Cleaner is a liquid cleaner used to remove dust, grease, grime, fingerprints, and solder flux from all surfac...
The item you are searching for has been discontinued* and has been replaced by the following item(s): DES10557
Statguard® Dissipat...
Statguard® Dissipat...
NLA
Humidity Indicator 6 Spot 10-60%, Can of 200
6 spot cards range is from 10% to 60%
Container of 200 labels per container
Used i...
Humidity Indicator 6 Spot 10-60%, Can of 200
6 spot cards range is from 10% to 60%
Container of 200 labels per container
Used i...
NLA
240 volt unit discontinued
The Dual Operator Workstation Continuous Monitor is a real time instrument that ensures that critical ESD...
240 volt unit discontinued
The Dual Operator Workstation Continuous Monitor is a real time instrument that ensures that critical ESD...
Discontinued Product
Menda, Wash Bottle, Yellow, Low Charging, 120ml (8oz) LDPE
#Features
Dissipative Yellow Bottle with swan neck spou...
Menda, Wash Bottle, Yellow, Low Charging, 120ml (8oz) LDPE
#Features
Dissipative Yellow Bottle with swan neck spou...
This product is now obsolete
Main Filter has 95% efficiency at 0.3 micron
Easy setup - Two station design for extraction of fumes, par...
Main Filter has 95% efficiency at 0.3 micron
Easy setup - Two station design for extraction of fumes, par...
ESD Survey Kit Desco 50564
Everything needed to conduct an ESD control program survey
Kit includes all the tools required to survey ...
Everything needed to conduct an ESD control program survey
Kit includes all the tools required to survey ...
This product is NO LONGER AVAILABLE
PROTECTOR, CARPET, STATGUARD 1 QT
Makes non-ESD chair fabrics and carpet ESD safe
Controls again...
PROTECTOR, CARPET, STATGUARD 1 QT
Makes non-ESD chair fabrics and carpet ESD safe
Controls again...
This product is NO LONGER AVAILABLE
PROTECTOR, CARPET, STATGUARD CONCENTRATE 1 GAL
* Makes non-ESD chair fabrics and carpet ESD sa...
PROTECTOR, CARPET, STATGUARD CONCENTRATE 1 GAL
* Makes non-ESD chair fabrics and carpet ESD sa...
Tester, AC Outlet & Wrist Strap, 220V
* Verifies proper AC outlet wiring and ground path integrity, enabling effectiveness of
groundi...
* Verifies proper AC outlet wiring and ground path integrity, enabling effectiveness of
groundi...
DISCONTINED product
Smooth Flow Tapered Tips are plastic tips designed to dispense medium to high viscosity materials such as epoxy, silico...
Smooth Flow Tapered Tips are plastic tips designed to dispense medium to high viscosity materials such as epoxy, silico...
Discontinued
Syringe Barrel (Clear), Plunger (Clear) & Piston (Black Neoprene) KIT, 10cc, Disposable (one use only syringes)
These syr...
Syringe Barrel (Clear), Plunger (Clear) & Piston (Black Neoprene) KIT, 10cc, Disposable (one use only syringes)
These syr...
No Longer Available
AFA-G is a more viscous / Gel like version of the successful AFA conformal coating. It has been designed to be used alo...
AFA-G is a more viscous / Gel like version of the successful AFA conformal coating. It has been designed to be used alo...
DISCONTINUED product
A flexible, fast drying transparent acrylic conformal coating for the protection of electronic circuitry. APL has be...
A flexible, fast drying transparent acrylic conformal coating for the protection of electronic circuitry. APL has be...
NLA
Electrolube CMO200 Clear Mechanical Oil 200ml
CMO has outstanding penetration characteristics, longevity and lubrication efficiency...
Electrolube CMO200 Clear Mechanical Oil 200ml
CMO has outstanding penetration characteristics, longevity and lubrication efficiency...
Electrolube ECSP Electronic Cleaning Solvent Plus - 200ml
NLA
Electronic Cleaning Solvent Plus is a fast-drying solvent specially formu...
NLA
Electronic Cleaning Solvent Plus is a fast-drying solvent specially formu...
DISCONTINUED product.
Fluxclene is a fast-drying solvent cleaner specially formulated for the quick and efficient
removal of flux resi...
Fluxclene is a fast-drying solvent cleaner specially formulated for the quick and efficient
removal of flux resi...
NLA discontinued
FSC is a solvent based conformal coating designed to protect printed circuit boards, particularly those exposed to high ...
FSC is a solvent based conformal coating designed to protect printed circuit boards, particularly those exposed to high ...
Electrolube HPA High Performance Acrylic Conformal Coating,1 Litres
NLA
now in 5L and 200ml cans ONLY
Electrolube HPA01L High Perfor...
NLA
now in 5L and 200ml cans ONLY
Electrolube HPA01L High Perfor...
DISCONTINUED
Electrolube Non-Silicone Heat Transfer Compound, 20ml Syringe
HTCP provides the ultimate in thermal conductivity together...
Electrolube Non-Silicone Heat Transfer Compound, 20ml Syringe
HTCP provides the ultimate in thermal conductivity together...
Discontinued product with no replacement
This two-part clear amber Polyester resin uses an innovative blend of technologies to provide th...
This two-part clear amber Polyester resin uses an innovative blend of technologies to provide th...
No longer manufactured. Replacement part number CTSME10CCR.
Surface Mount Adhesive 10 ml syringe
A glue to stick SMD devices to PCB bo...
Surface Mount Adhesive 10 ml syringe
A glue to stick SMD devices to PCB bo...
DISCONTINUED product
Surface Mount Rework Flux
Electrolube Surface Mount Rework Flux is a quick drying, mildly activated (RMA type) no-c...
Surface Mount Rework Flux
Electrolube Surface Mount Rework Flux is a quick drying, mildly activated (RMA type) no-c...
SSW
NLA
Screen & Stencil Wipes
100 Wipes
Electrolube's Screen & Stencil Wipes remove both solder pastes and adhesives
with equal hig...
NLA
Screen & Stencil Wipes
100 Wipes
Electrolube's Screen & Stencil Wipes remove both solder pastes and adhesives
with equal hig...
DISCONTINUED PRODUCT with NO replacement once stock is sold
Still available in the 5 litre container ELSWAS05L
SWA Safe Wash - ...
Still available in the 5 litre container ELSWAS05L
SWA Safe Wash - ...
Electrolube Thermal Bonding System, 20 ml Twin Syringe System. - No Longer available
NLA
Thermal Bonding Compound is a two part epoxy ...
NLA
Thermal Bonding Compound is a two part epoxy ...
Now Obsolete, No Replacement from Electrolube
Electrolube Conformal Coating Aquacoat Plus is a water based conformal coating, based on p...
Electrolube Conformal Coating Aquacoat Plus is a water based conformal coating, based on p...
DISCONTINUED
Fancort ESD Component Trays
Rectangular trays in various sizes for storing and transporting assemblies. The MS-Q11.1 has ...
Fancort ESD Component Trays
Rectangular trays in various sizes for storing and transporting assemblies. The MS-Q11.1 has ...
DISCONTINUED
Fancort ESD Component Trays
Rectangular trays in various sizes for storing and transporting assemblies. The MS-Q11.1 has ...
Fancort ESD Component Trays
Rectangular trays in various sizes for storing and transporting assemblies. The MS-Q11.1 has ...
DISCONTINUED
Fancort ESD Component Trays,
Single cavity with slots for dividers to create cavities 2-7/8" or 3-3/4" x 4.52".
Lip on...
Fancort ESD Component Trays,
Single cavity with slots for dividers to create cavities 2-7/8" or 3-3/4" x 4.52".
Lip on...
Desoldering iron for 474 / 475
Discontinued.. NLA
including desoldering tip + residual solder container
L x W = 200 x 80 mm, 100 g
24 ...
Discontinued.. NLA
including desoldering tip + residual solder container
L x W = 200 x 80 mm, 100 g
24 ...
Discontinued product
Hakko 808 Heater Element, 240 Volt 50W for the Portable Desoldering Tool
In New Zealand Baskiville are authorised...
Hakko 808 Heater Element, 240 Volt 50W for the Portable Desoldering Tool
In New Zealand Baskiville are authorised...
All in one, portable desoldering gun. Well balanced design with excellent heat recovery for lead free application.
#Features & Benefits
...
#Features & Benefits
...
Now Obsolete and spares also.
Analog type rework system with temperature offset function . Comes Complete with A1130
nozzle, 4.4mm stra...
Analog type rework system with temperature offset function . Comes Complete with A1130
nozzle, 4.4mm stra...
DISCONTINUED. Replacement p/n HFX805-43, 300w
FX-801 can provide tremendous heating performance with super power 300 W
composite heater....
FX-801 can provide tremendous heating performance with super power 300 W
composite heater....
40+ years in Business
Shop on line