SR Silicone Conformal Coating , Aerosol size but other sizes are available by special request.
Silicone Conformal Coating is the most universal coating, offering protection for a wide variety of environments.
UL recognized (UL746E) - file E95150
Max operating temperature - to 392°F (200°C)
Non-ozone depleting
Dielectric strength - 1100 volts/mil
Moisture resistant
Chemically resistant
Vibration resistant - flexible
IPC-CC-830B & MIL-I-46058C qualified
UL94 V-0 rated
UV indicator for black light QC inspection
Surface to be sprayed should be thoroughly cleaned with solvent such as Flux Remover G3 (1631). Surface must be
completely dry before application of coating. As you spray or brush coating, allow material to flow around components.
Coating will be tack free in approximately 60 minutes; however, full cure requires 72 hours depending on humidity and
thickness of application. Coated boards can be reworked by applying soldering iron directly to coating, or complete
removal can be achieved in 1 to 3 hours by using Conformal Coating Remover (2510). Removal time depends on temperature,
thickness of coating, and application.
