Fume Extraction & Spares

75 MM "Y" CONNECTOR
Used to connect two Collection areas to one outlet
$114.94 (EX GST)
75mm (3") Flex Hose, 2.5m long with End Cuffs that are 75mm in dia. If you need a hose with a reducer to 50mm use P/N 8886-0299
Reducer from 75-50mm
$58.75 (EX GST)
Joins the flexible hose to the top of the 75mm outlet of the fume extractor

75mm x 75x x (3" x 3" )
$58.75 (EX GST)
Pre filters for the Arm Evac 105/ 200 & 250. Packet of 5 (New Design)

Pre filters should be changed regularly to maximize the life of the...
$71.77 (EX GST)
Pre Filter for Evac 400 - Pkt of 10

Pre filters should be changed regularly to maximize the life of the main general purpose filter.

O...
$663.80 (EX GST)
Pre Filter for Arm 1200 - Pkt of 10

Pre filters should be changed regularly to maximize the life of the main general purpose filter.

T...
Pre Filter for three Arm Evac 500

Pre filters should be changed regularly to maximize the life of the main general purpose filter.

The...
$48.67 (EX GST)
Pre Filter for Tip Evac 2

Hepa & Activated Carbon Filter for Tip Evac 2 p/n 8883-0171-P1
$31.36 (EX GST)
Combination Hepa and activated carbon Filter for the Tip Evac 2

Pre filter for the Tip Evac 2 is p/n 8883-0616-P1

Other filters availa...
$319.04 (EX GST)
Pre Filter for Tip Evac 10/20 & 15/50

Hepa filter for Tip Evac 10/20 & 15/50 is p/n 8883-0571-P1
Activated Carbon Filter for the Tip Eva...
$48.67 (EX GST)
Economy Filter for FX50 Pkt of 3

Recommended for soldering applications where cost-effective solutions
are required.

Pre filters rec...
$27.00 (EX GST)
Filter General Purpose Main for AE 105/200 & 250 (New Model) Includes 1 pre filter

Main General Purpose "Combo" filter for the Arm Evac 2...
$375.00 (EX GST)
Adhesive Filter for Evac 105, 200 & 250 Includes 1 x pre filter

Recommended for any bench-top application utilising adhesives, solvents, ...
$405.10 (EX GST)
General Purpose Main Filter (Primary) for the Arm Evac 500

The Arm Evac 500 uses separate Pre, Primary and Gas Filters which needs to be ...
Carbon Filter (Gas) for the Arm Evac 500

The Arm Evac 500 uses separate Pre, Primary and Gas Filters which needs to be changed individua...
Constructed of 18-Gauge steel and acoustical foam baffle liner.


Note:
The Arm- Evac 250 Silencer/ Mobile Cart model includes front lo...
Allows highly efficient source capture at 2 points. Each arm is 610mm long and one can be blocked off.
Flow rate 45 cfm with one arm only, ...
$268.12 (EX GST)
The Plenum is ideal for providing fume extraction to work spaces where soldering is being performed over a large area, such as at several lo...
ESD Safe Flex-Arm Quick-Mount Bench Mounting Bracket

Allows the ESD Safe Flex-Arm to be mounted virtually anywhere. Quick mount clamp all...
75mm (3) ESD Safe Flex Arm

The most versatile and economical collection accessory (includes round end piece).

ESD Rating: Surface Resi...
$211.41 (EX GST)
ESD Safe Flex-Arm and mounting kit. This is the most popular extraction complete mounting kit.

Contains everything needed to mount an ESD...
$481.07 (EX GST)
Bench Mounting Bracket for 75 mm (3") ESD Safe Flex Arm.
$176.18 (EX GST)
Flow Controller for 75mm (3:) ESD Safe Flex Arm

The Air Flow Controller for the 75mm (3) ESD Safe Flex Arm (8886-0750-P1) gives the user ...
$56.39 (EX GST)
For Pace EUROPE
Tip Evac fume extractor
$81.11 (EX GST)
8887-0185-P1 Package of 1

For Pace PS-80 and PS-70 and PS-90 to change into extractor
KIT
1x 8887-0350
1x 8887-0349
1x 8887-0326...
$135.19 (EX GST)
U clip pack of 5 for Pace PS80 with extractor
$11.90 (EX GST)
Tube holder for Pace PS80 with extractor
$12.98 (EX GST)
Rear guide for Pace PS80 with extractor
$16.22 (EX GST)
Clamp for Pace PS80 with extractor
$16.22 (EX GST)
1/4" ( 6mm ID )
1.5 metres long clear Silicone tube
$20.55 (EX GST)
8888-0105-P1 ARM-EVAC 105

The best protection from harmful fumes in its price range. The Arm-Evac 105 is portable, compact and
can be e...
The Arm-Evac 50 is a unique, portable, cost-effective, bench-top fume
extractor that provides wide area fume extraction or highly efficien...
ARM-EVAC 200

The Arm-Evac 200 is designed to meet the needs of light duty production
as well as rework and repair operations. Lightweigh...
The Arm-Evac 250 is ideal for heavy-duty operations that need high capacity and continuous particle filter monitoring. Incorporating micropr...
$3,249.45 (EX GST)
ARM-EVAC 500

Perfectly suited for high performance cellular manufacturing activities and
provides
fume extraction for up to 6 worksta...
Bofa 50mm table top Fume Extraction arm that fits into MP50ESD Bench Mount

BOFA’s wide range of volume LEV extraction accessories now in...
$425.00 (EX GST)
Combined filter for Bofa V250
$475.98 (EX GST)
Pre-filter for Bofa V250 - pack of 5
$79.16 (EX GST)
Bench seal outlet for extraction tube. Seals off when closed
$85.00 (EX GST)
Bofa 50mm table top Fume Extraction arm that fits into MP50ESD Bench Mount
$249.00 (EX GST)
Hakko 493 Filters PK5
Also fits the FA-400
$42.33 (EX GST)
Hakko Pre Filter A For A FA430, Set of 10
$32.28 (EX GST)
Hakko Main Filter For FA430
$391.82 (EX GST)
Filter Pipe w/ front holder, ceramic paper filter

Was product code: HKB2073
Filter Pipe Assembly For FR-400

Was product code HKB5081
DUCT KIT,RECTANGULAR NOZZLE,FOR FA430-16
$219.48 (EX GST)
Hakko Smoke Absorber, ESD, 240v

A small bench top smoke absorber that is compact, quiet and ESD safe.

Absorbs fumes onto a replaceable...
$195.97 (EX GST)
Hakko FA430 Fume Extraction System 240V

The Hakko FA-430 is a volume fume extractor unit with pre-HEPA,
and maximum 2 ports/2 stations,...
$1,646.14 (EX GST)
Hakko FA431 Fume Extraction System 240V

In Addition To FA430, a quiet and powerful smoke absorber, FA431, a new smoke absorber with long ...
The Metcal METFPBVX200 is a pre-filter for use with BVX200 Fume extration station unit.
Packet of five pre filters

The Metcal FP-BVX200...
$165.00 (EX GST)
Purex main filter, hepa, chemical, for fumecube

#Features & Benefits
Multiple filter media choices to fit your fume extraction needs
P...
$597.05 (EX GST)
Front Assembly for a 201B Desoldering tool as used on a 731A Rework Station
Contains Front holder, Spring, Filter Pipe, and Ceramic disc
$47.25 (EX GST)
Quick ESD Smoke Absorber, on flexi arm, Black

Colour: Black (picture not true colour).

Features

1. Remove noxious fumes quickly, ...
$189.00 (EX GST)
Quick ESD Smoke Absorber

Features

1. Remove noxious fumes quickly, safely and efficiently.
2. Angle can be adjusted at will and ea...
$113.40 (EX GST)
Fume Extractor Filter for 493 and similar bench type Fume extractors.

Approx. 125mm x 125mm x 8mm thick
$4.95 (EX GST)
Quick 6101, Fume Extractor

Features:

* Integrative structure design, easy installation, agile movement, no need to lay any pipelines. ...
$750.00 (EX GST)
Quick 6102, Fume Extractor

Features
1. It is very easy for you to install the fume extractor due to the integrated structure, which requ...
$1,150.00 (EX GST)
HEAVY DUTY FUME EXTRACTION SYSTEM 6301
As indoor environmental regulations continue to grow, so does the necessity to keep your facility'...
$2,395.00 (EX GST)
Quick Fume Hose & Absorber Only for 6101 & 6102

Includes:

Fume hose, length 150cm, Ø75mm (suitable for round absorber hole). p/n QUIK...
$136.50 (EX GST)
Quick Table Clamp for Fumex 6101 & 6102

To connect mouldable hose with a diameter of 75 mm from the upper side and the soft hose with a d...
$44.31 (EX GST)
Requires a 75mm clearance hole to be drilled in through the bench. Connect 75mm hose from Fume extractor on the underside and a 75mm fume h...
$39.00 (EX GST)
Quick Fume Extractor Hose Only 1m long , 75mm Dia -75mm

For Clamp option p/n QUIKCC75-75

Soft hose with a diameter of 75 mm to connect...
$56.62 (EX GST)
Quick 6101 Main Filter For Single Port Extractor


385mm long
195mm wide
250mm high
$185.00 (EX GST)
Quick 6102 Main Filter For Twin Port Extractor

385 mm long
195mm wide
300mm high
$215.00 (EX GST)
Quick 6101 Middle Filter For Single Port Extractor
$65.00 (EX GST)
Quick 6101 Pre Filter For Single Port Extractor

Sold as a packet of 5
$35.00 (EX GST)
Quick Round absorber hole, Ø125mm (suitable for Ø75mm fume hose),
ESD safe.
Transparent hood for rear of bench 200 wide x 200mm high, x 100 deep.

75mm rear inlet.
$45.00 (EX GST)
Transparent hood for rear of bench 250 wide x 220mm high, x 150 deep.

75mm rear inlet.
$89.00 (EX GST)
Adjustable Air door, or flap that controls the amount of air flow up the tube. Can be fitted anywhere along the hose and is used to turn sta...
$35.00 (EX GST)
Weller Fume Extractor Hose Only, 5mm, For Weller FT12
$18.40 (EX GST)
Weller Filter Cartridge Cooper. For use with WFE2P
$195.04 (EX GST)
Weller Pre Filter, FT12
$27.74 (EX GST)
Weller Fume Extractor Unit, ESD, FT12, 112-0000-ESD

Small, portable, compressed air driven fume extraction unit.

Up to 2 FE soldering ...
$1,616.34 (EX GST)
Weller Fume Extractor WFE2P + T0053640799
Self-Contained 2 Operator Fume Extractor

#Features
* Self-contained bench-top fume extractio...
Page 1 of 1

Free shipping in nz for online customer orders over $100.00
Phone or online support
mon to fri 8AM to 5PM
40+ years in Business