Ionised Airknives produce fast-moving ionised air which can neutralise static electricity and remove contaminants.
Model 5100 - Compressed Airknives 500mm.
Non-turbulent laminar airflow increases cleaning andstatic neutralisation performance
Air knives amplify compressed air by a factor of up to 20:1 for economy
Available in a wide range of standard lengths in two body sizes - the compact 5000
Ionisation power up to 6 kV provided by 1250-S Static Eliminator Bar and Fraser HP Power Unit
Powerful ionisation kills the static charge, allowing the fast beam of laminar air to remove it.
Fraser 5000 Air Knives are used for hundreds of different cleaning applications from automobile and automotive mouldings to medical parts and packaging.
Also used for sheet separation
Construction:
Air Knife: aluminium. 1250-S Static Eliminator Bar (see separate Datasheet).
Cable:
Hi-Flex 30 kV screened cable with 70 mm bend diameter. Standard length is 2 m - longer lengths can be specified at time of order (subject to maximum load
on power unit).
Safety:
Meets OSHA and international standards. 5 mA maximum current from Power Unit.
High voltage resistance inside bars further limits current below 50 µA.
Power Unit:
Use with Fraser 5.5 kV and 6 kV Power Units. See Datasheets.
Air Supply:
The air should be clean and dry. Air connection(s): 1/4inch BSP female thread with push-fit connector for 8 mm OD tubing.
Environmental:
60 °C maximum temperature. 70 % rH non-condensing max.
Noise from Air Knife at 1 m is 65 dB(A).
Certification:
CE.
Options:
ATEX EX version - see EX-1250 EX Static Eliminator.
24 V DC Static Eliminator options
1 x 5100 Compressed Air Kinfe + 2m of cable as standard (1250-S Static Eliminator Bar NOT included)